38CC PETROL CHAINSAW 16" 1.25KW 2HP Sold by Ashcraft GB
38CC PETROL CHAINSAW 16" 1.25KW 2HP
Sold by Ashcraft GB
38cc 2-Stroke Air-Cooled Petrol Engine
1.25KW and 2.0 Horsepower Torque
9,000 rpm Engine Speeds
100cm Extension Pole for over three metre reach
Great Tree Pruning Tool
9000rpm Petrol Chainsaw
With its 38cc two-stroke petrol engine, this domestic chainsaw offers great value for money. Easy to assemble and easy to use, the Raptor38 chainsaw delivers 2.0 horsepower of torque and engine speeds of nine thousand RPM. The Oregon chain will make light work of thick branches and small to medium size tree trunks.
Comes with mixing bottle, with measurement guide so you can easily mix the recommended 25:1 fuel to oil ratio. Remember to also fill the chain oil reservoir before use, to ensure a well lubricated chain. With an operational weight of only 6kgs and an anti-vibration mechanism, you’ll find this chainsaw easy to handle with minimum muscle strain and maximum comfort.
Starts first time (in all weathers).
To start your chainsaw, prime the fuel bulb until it goes firm and you can see some fuel mix inside the bulb (usually about 6 pumps).
Pull out the choke until it clicks.
Turn the ignition on.
Put a foot on the handle to hold the chainsaw steady and make sure the chain brake is on (push forward until it clicks).
Pull Chord a few times until you feel resistance.
Then give a big yank with the choke on, you should hear the engine growl.
Turn the choke off (press in), and then one more big yank and the engine should roar into action.
From logging, to tree-felling, this petrol chainsaw can do it all. Included in the box are the 38cc petrol base unit, the 16” guide bar, chain guard and chain, brake assy, mixing bottle, 5-piece toolkit and instruction manual.
Engine Displacement: 38cc
Engine type: Air-cooled, Two-stroke, petrol engine
Power transmission method: Automatic centrifugal clutch with bevel gear
Max. engine speed (min-1): 9000
Max. Power: 1.25KW / 2.0HP
Idle Speed(min-1): 3400
Stopping Method: Sparking Circuit Primary Short
Cutting line: 370mm
Start system: Recoil
Cooling system: Forced Air
Volume of Fuel Tank: 310ml
Oil tank capacity: 210ml
Fuel mixture petrol-oil-mixture : 25:1
Sound Power Level: 113db
Tip of Chainsaw bar/blade to engine: 9' 9" (300cm with extra pole)
Long Reach Pruning Saw (Small Chainsaw)
Chain Guide Bar: 12”, 3/8" pitch. 043”gauge
Sprockets: 3/8" inch, Fixed Spur
Gearcase Ratio: 1.06:1
Sound level: 113db
Chain Speed: 23.5m/Sec @ 10,000 min-1
Chain Lubrication Automatic Adjustable Oiler
Chain is Simple to Adjust with the adjusting screw and lock nut